EN
Home ProductVoltage Current Protector
| Setup Menu | |||||||
| Code | Option | Set range | Default | Code | Option | Set range | Default |
| P1 | Power-on delay | 1-999 | 5S | P14 | Rapid power failure protection | ON/OFF | ON |
| P2 | Recovery delay | 1-999 | 30S |
P15 |
Display mode |
1:Standards 2:Manual switch 3:Automatic switch |
1:Standards |
| P3 | Overvoltage | 130-300 | 270V |
|
|
|
|
| P4 | Overvoltage recovery value | 125-295 | 265V |
|
|
|
|
| P5 | Undervoltage | 80-210 | 170V | P16 | Automatic reset |
ON:Self-recovery OFF:Manual recovery |
ON |
| P6 | Undervoltage recovery value | 85-215 | 175V |
|
|
|
|
| P7 | Overvoltage action delay | 0.1-10.0 | 0.5S | P17 | Action/knife mode | ON/OFF | ON |
| P8 | Voltage correction | -10%-+10% | 0V |
|
|
|
|
| P9 | Overcurrent |
1-40 1-63 |
40A 63A | P18 | Energy saving mode | ON/OFF | OFF |
| P10 | Overflow as delay | 0.1-10.0 | 1.0S |
|
|
|
|
| P11 | Continuous overcurrent counting | 0-20 | 0 times | P19 | Setup lock password | 000-999 | 112 |
| P12 | Current correction | -10%-+10% | 0A | P20 | Change password lock | 000-999 | 112 |
| P13 | Frequency correction | -2.5%-+2.5% | 0Hz |
|
|
|
|
Note:When the value of P19 is not 112,only the parameters can be viewed and cannot be set.P20wll only appear when the P19 valueis correct.
